Polar Bear Air Conditioning & Heating Inc. Blog: Posts Tagged ‘Air Conditioning’

Washington DC Air Conditioning Question: What is a Matched HVAC System?

Monday, July 16th, 2012

It has been about 200 years since the arrival of interchangeable parts during the Industrial Revolution. Today, we laud being able to take a malfunctioning part from a car, computer or vacuum cleaner, replace it with a newly minted part from any number of manufacturers, then keep right on plugging along.

Although this is a blessing in most arenas, when it comes to your Washington DC air conditioning system, it is not necessarily a good practice. Heating and cooling systems work best when they are matched – but what does that mean? And why does it matter?

 Why Matched Parts Matter in HVAC Systems

When referring to HVAC systems, a matched system is one in which various components are designed to work together. For example, an air conditioner and furnace made by the same manufacturer can be matched, as can a furnace and a heat pump.

Typically, the matching is done in such a way that the “outdoor” components, such as air conditioners and heat pumps are designed to work best with their “indoor” partners, like air handlers and furnaces. There are also matched systems in which every component is matched to every other.

Efficiency Boosts

While this may seem to make maintenance and repairs a pain, the practice provides a big boost to the efficiency of the system. Because the components were designed and manufactured by the same team to work in harmony, the system performs optimally. Although you can often replace one component of a matched system with one from another manufacturer and have it work fine, the system can lose efficiency, often to a significant and noticeable extent.

For these reasons, it is best to make use of matched systems in your home whenever possible. This means choosing a new matched system to install, replacing broken parts with ones that match the rest of the system and even replacing older systems with newer ones to properly match, when necessary.

It may seem like a hassle at first, but it saves money in the long run by adding increased efficiency over unmatched systems. For more information about installing new heating and air conditioning systems in Washington DC, give Polar Bear a call today!

Continue Reading

Tags: , , ,
Posted in Air Conditioning | Comments Off on Washington DC Air Conditioning Question: What is a Matched HVAC System?

Derecho Thunderstorm, No Phone Service, No Air Conditioning The Top 3 Reasons To Like Your A/C Company

Sunday, July 8th, 2012

Why “like” or “follow” your air conditioning company on Facebook or Twitter?  To communicate and get help in an emergency.  We all learned the importance of social networks from the Derecho thunderstorms on June 29.  At Polar Bear Air Conditioning, although our phone lines were powered by generator and our crews were working, our phone company did not have power and therefore our customers could not reach us through our main number, even forwarded to our cell phones.  Over one million DC area residents also lost power in our homes, but many of us were able to travel to Wifi hot spots with power to recharge our devices and access the Internet.

For those customers who were able to access our website, we posted an emergency number on our homepage.  Wouldn’t it be great in a similar State of Emergency to receive a Tweet or Facebook post from your air conditioning and heating company, with an emergency number to reach us?  Polar Bear Air Conditioning will do this in all future emergencies that involve heating, air conditioning and communication issues for our customers.  But we need your help.  In the coming weeks, we will be contacting our customers and asking you to like us on Facebook or follow us on Twitter, or you can do that now by choosing the links on our home page.  We will ask you if you only want to be contacted in emergencies, or would like to receive newsletters and special offers no more than 4 times a year.  You can also opt to be contacted by email.  We will never sell or share your information with 3rd parties, and you will not receive more than 4 promotional emails a year.

We hope to not experience another Derecho for several years.  However, our goal is to be ready to communicate with and help our customers through all States of Emergency in all four seasons.  Have a quiet and cool summer.

Your friends at Polar Bear Air Conditioning and Heating, Inc.

Continue Reading

Tags: , , ,
Posted in Air Conditioning, Air Conditioning Repair, Heat Pump Systems, Heat Pumps | Comments Off on Derecho Thunderstorm, No Phone Service, No Air Conditioning The Top 3 Reasons To Like Your A/C Company

Washington DC Air Conditioning Tip: Air Filter Sizing

Monday, June 4th, 2012

If you moved into a new home or had someone change the filters on your Washington DC air conditioning or heating system for you, you may notice that whoever did the job put on the wrong size filter. This is not uncommon and is usually the result of an effort to save either time or money. However, in the long run it actually costs both. Here is how you can fix the problem of a wrong size filter.

The WRONG Way

If you have a filter that is too big for your system, it may seem like an easy enough fix– just fold it over or trim it down, right? Not so fast.

Folding the filter over makes for an imperfect seal. Air will leak through and around the bend, bypassing the filter entirely. This causes dirt and debris to build up on the fan, slows down air flow, degrades performance, decreases air quality and overall makes a big mess that you will have to pay to fix or clean up later.

Bending or cutting the filter also decreases its structural integrity. The whole filter can collapse while installed, creating not just a performance issue and a potentially costly repair, but also possibly creating unsafe conditions.

Furthermore, don’t give into the temptation to run your Washington DC air conditioning or heating system without a filter for the time being. The debris will quickly build up in your AC system, as well as being blown into your home. Heating and cooling systems should always be operated with the proper filter installed.

The RIGHT Way

So, what do you do when you have an air filter that is the wrong size? The only solution is to find the right size. If you are having trouble finding the right air filter for your system, try these tips:

  • Refer to your owner’s manual for the filter model number.
  • Bring the make and model information of your heating/cooling system to the store and ask someone there for help.
  • Have a professional inspect your system and replace the filter. (You should have a professional inspection once a year, anyway.)
  • For HVAC systems that are large or have special dimensions, special order custom filters to fit.

Above all, never operate your HVAC system without a clean, correctly sized filter properly installed. For more information about about which air filters are best for your system, give Polar Bear Air Conditioning a call!

Continue Reading

Tags: , , ,
Posted in Air Conditioning | Comments Off on Washington DC Air Conditioning Tip: Air Filter Sizing

Washington DC Air Conditioning Tip: Energy Efficient Home Cooling

Monday, May 21st, 2012

Having an energy efficient air conditioning system in place is a great way to keep cool in the summer for less. But that is far from the only thing you can do to help reduce your energy bills throughout the hottest months of the year. In fact, there are several simple steps you can take to start cutting down on your cooling costs right now and lighten the cooling load that your Washington DC air conditioning system has to bear.

One of the main things to remember when you are trying to keep your house cool is that every door and window is potentially letting in warmer air from outside and letting the cooler indoor air escape. You can cut down on this considerably if you simply take the time to seal up these access points and any others you are able to find.

Putting up plastic over unused doors and windows and checking all areas of the house for drafts and adequate insulation will dramatically reduce the cost of keeping your house cool in the summer. Also, you can keep the sun from warming up your indoor air by drawing the blinds, particularly on those windows that let in the hot afternoon sun.

Putting up light colored siding and reflective roofing will also do a great deal to keep your overall cooling costs down. That is because these materials are able to direct the heat of the sun away from your house rather than letting it be absorbed so that it can heat up the inside. The vast majority of the heat that your air conditioning system has to remove from your house comes in through your roof and walls, so blocking this access point is extremely helpful in keeping your overall cooling costs down.

All of these are steps you can take to reduce the total cooling load that your Washington DC air conditioning system has to deal with. But if you want your system to continue to function at peak energy efficiency, you will have to take care of it as well.

This typically means having someone come in once a year to perform a thorough inspection of your air conditioning system and to clean out any debris that may have accumulated over time. Having this done will make it possible for your air conditioner to continue to function at the highest possible levels of energy efficiency for years to come. To schedule a maintenance visit, give Polar Bear Air Conditioning a call today!

Continue Reading

Tags: , ,
Posted in Air Conditioning, Energy Savings | Comments Off on Washington DC Air Conditioning Tip: Energy Efficient Home Cooling

Washington DC Heating and Air Conditioning Contractor’s Guide: Basic HVAC Terminology

Monday, May 7th, 2012

Ever try to look up basic information about your Washington DC heating and air conditioning systems? There are dozens of terms that might as well be Greek for all you know – a mishmash of words and phrases talking about energy efficiency and air flow ratios. To make your next upgrade a little easier and give you a baseline with which to work, here are a few of the most common HVAC terms you’ll hear in the industry:

  • AFUE – Annual Fuel Utilization Efficiency – This is a simple measurement of how much fuel a furnace converts into actual heat in your home. So, if a furnace converts 92% of the fuel it consumes into heat, it has an AFUE rating of 92.
  • Watts – A single watt is a measurement of electricity. Commonly, your electricity use is assured in kilowatts or kilowatt hours (kWh).
  • BTU – British Thermal Unit – A BTU is a common measurement of how much energy is produced or consumed by an appliance. When referring to an air conditioner, one “ton” refers to 12,000 BTUs.
  • SEER/EER – Seasonal Energy Efficiency Ratio refers to how many BTUs can be produced with a single Watt of electricity per hour. So, an air conditioner with an SEER of 14 can produce 14 BTUs of cooling per watt consumed each hour.
  • HSPF – Heating Seasonal Performance Factor – Refers to the efficiency of the heating elements in your heat pump.
  • COP – Coefficient of Performance – A measurement of how effective your heat pump is at heating a space compared to standard electrical resistance heat. The lower the temperature gets outside, the lower the COP will be. Equipment is usually measured for COP at 47 and 17 degrees to give an idea of seasonal performance of a new heat pump.
  • Refrigerant – Refrigerant is any gas that is used to draw heat from the air in a particular environment through an air conditioner or heat pump. It has a much lower boiling point than water, allowing it to cool despite the temperature outside. Currently, most equipment uses R-22 refrigerant while the new standard will be R-410A (Puron), legally required in all cooling units by 2020.
  • CFM – Cubic Feet per Minute – Used to measure the volume of air passed through an air handler by an air conditioner or furnace.

There are a number of complicated details to keep track of when choosing a new air conditioner or furnace. To ensure you get the very best out of your Washington DC heating and cooling system, read up on these details in advance – you’ll feel a heck of a lot smarter when you call. For any HVAC service you need in the Washington DC area, give Polar Bear Air Conditioning a call!

Continue Reading

Tags: , , ,
Posted in Air Conditioning, Heating | Comments Off on Washington DC Heating and Air Conditioning Contractor’s Guide: Basic HVAC Terminology

Common Air Conditioner Problems in Washington DC

Monday, April 23rd, 2012

Air conditioners are an important part of our lives. They keep us comfortable despite overbearing heat and humidity outside all summer, but because they run constantly for months and because they are such complicated pieces of machinery, they can experience some problems. Here are some of the most common problems you’re likely to run into with your Washington DC air conditioner and how to solve them:

 Leaks

A common problem that many people ignore or are unaware of is refrigerant leakage. It is possible that when the system was installed, it wasn’t properly charged, but most of the time if your system is low on refrigerant, it is because of a leak. You can’t just pour more refrigerant in and call it good, though.

The leak needs to be fixed, both for health and environmental reasons. If you notice that your system is low on refrigerant or you smell something off – often like acetone, call a professional immediately for inspection and repair.

 Sensors

An air conditioner doesn’t do you any good if the sensors don’t work properly. Improperly working sensors will fail to properly read the temperature in the home or from your thermostat. So, it might be 80+ degrees in your home but if the thermostat reads it as 72, the system won’t turn on. The air conditioner itself probably still works fine, but unless it can successfully read the temperature, you won’t get the cooling you need to stay comfortable.

Check first to see if the sensor was moved or knocked toward the evaporator coil (which will keep the temperature reading low).

 Drainage Problems

Your air conditioner acts as a dehumidifier as well, producing a liquid known as condensate. This liquid usually drains from the air conditioner into a designated area away from your home. However, if the condensate drain gets clogged or if the system wasn’t properly installed, that condensate can start to build up in your home. If you notice leakage around the coils, you may need a pump to remove the condensate properly.

Properly maintaining your air conditioner can usually be done with regular maintenance each year, but if one of these problems pops up, call a Washington DC air conditioning professional and get them fixed right away.

For any AC maintenance or repair, give Polar Bear a call today!

Continue Reading

Tags: ,
Posted in Air Conditioning | Comments Off on Common Air Conditioner Problems in Washington DC

Washington DC Air Conditioning Guide: How to Calculate Duct Size for an AC System

Monday, April 9th, 2012

Duct sizing is a complex process using one of three methodologies. The goal of duct sizing is to provide the perfect space through which heated and cooled air can travel around your home. Ducts should provide ample air flow to keep you comfortable without overworking your Washington HVAC system or costing you an arm and a leg on your energy bill.

Methods Used for Sizing

There are three methods used for most modern duct sizing. The first is the Velocity Method. The velocity method takes into account the speed at which air flows through the ducts based on their general size. A series of equations is used to determine this, including duct cross sectional area, air flow rate and air speed. A much more detailed breakdown is available on the EngineeringToolbox.com for those interested in the math behind the process.

In general though, the velocity method allows contractors to determine the appropriate size and layout of ducts based on their application (residential, commercial, industrial or high speed) and their position (main or branch ducts).

Contractors may also use the Constant Pressure Loss and Static Pressure Recovery methods to design ductwork for your HVAC system. The constant pressure loss method tends to result in more components but provides a more accurate reading of the actual pressure loss in the system based on the materials used and the layout of your ductwork.

Static pressure recovery focuses on ensuring the same pressure level is achieved at all vents and inlets for the system. It is probably the most complicated sizing method, however, so it is rarely used for residential installations.

Simplifying the Process

Were we to break down the process into its core components, this is what a Washington DC air conditioning contractor would do when sizing your duct work:

  • Determine CFM for Each Room – using the Manual J for load calculations, they would determine the CFM. This is based on the (Room Load/House Load) x Equipment CFM. The entire house must be measured and load calculations completed before this can be done.
  • Friction Loss Rate – Friction loss rate is the (Available Static Pressure x100 / Effective Length).
  • Duct Sizing – Finally, the contractor will use a chart or software to select ductwork based on the friction loss and CFM calculated in the first two steps.

The goal of all of this math is to ensure that the system installed is exactly as large as is necessary to distribute heated or cooled air to the entire house. Incorrect measurements result in improper delivery of that air and a system that doesn’t quite get the job done.

Continue Reading

Tags: , ,
Posted in Air Conditioning | Comments Off on Washington DC Air Conditioning Guide: How to Calculate Duct Size for an AC System

Old Equipment You Really Shouldn’t Keep in Washington DC

Wednesday, November 30th, 2011

When you move into an existing Washington DC home, there are many pieces of equipment that you may not want to keep. Some of them are just old and poor quality, while others cost you a lot of money and others still may be dangerous to you or your children. Before you settle into your space, make sure you have every one of your systems checked thoroughly for potential problems including inefficient heating, dangerous parts or environmentally unfriendly components.

Energy Cost

Number one on your list should be the cost of the energy needed to run your HVAC equipment. Furnaces and air conditioners in particular have become much more energy efficient in the last 10 years so older systems routinely cost much more money to operate than new ones. That doesn’t mean you should immediately rush out to replace your old furnace, but if it isn’t working properly or it’s costing you more money than you’d like, the cost benefit of a new system is often worth checking into.

Other things to check include your insulation, your air quality system, your ventilation system and anything used to heat or cool food in the kitchen – all of which may be less efficient than you might like.

Ozone Depleting Refrigerants

Older appliances like air conditioners may still use ozone depleting refrigerants that are no longer considered safe (or in some cases legal) for home use. If this is the case, not only does your system probably have a very low SEER rating, it likely isn’t good for the environment or your own health. So, have your system replaced as soon as possible to avoid potentially negative side effects.

Dangerous Equipment

Finally, there are those pieces of equipment that are dangerous. If you find that your furnace has rust around the edges, your gas lines are kinked, or you have a dangerously out of date heat pump in your backyard, it may be time for some replacements. In general, these systems will last for years longer than they are considered safe and while you probably cannot buy a house without a working and safe furnace and air conditioner, you should still have them inspected carefully and replaced as soon as possible if you suspect problems.

Good HVAC equipment is hard to come by – if your home has it already, you’re in luck, but if you happen to move into a place with poor quality materials and equipment, have it replaced as soon as possible. Your health and wallet will both benefit greatly.

Continue Reading

Tags: , , ,
Posted in Air Conditioning, Heating | Comments Off on Old Equipment You Really Shouldn’t Keep in Washington DC

Is My Home as Comfortable as It Could Be? A Question From Palisades

Wednesday, September 14th, 2011

When it comes to indoor comfort in your Palisades home, there are a surprising number of things you need to take into account. Of course, you need to have a good heating and cooling system in place so that you can easily maintain a comfortable indoor temperature all year round. But that really isn’t enough when you’re trying to create the optimal indoor environment. So what else do you need to consider?

Humidity 101

Well, for starters, it’s a good idea to check the humidity levels in your home. Improper humidity can lead to all sorts of problems, and it can also make it harder for your home heating and cooling systems to maintain a comfortable temperature. Air that’s too dry doesn’t hold heat as well as properly humidified air, so in the winter, your heating system will have to work harder to keep your family comfortable. Too little humidity can also dry out your skin and cause the symptoms of colds, allergies and asthma to last longer and be more severe.

On the other hand, if there is too much humidity in your home, you’re more likely to develop problems with mold and dust mites. And your home cooling system will have a harder time keeping you comfortable indoors. Luckily, there are plenty of great humidification and dehumidifying air conditioning systems on the market right now that can take care of all of these types of problems for you, and they’re definitely worth looking into if you’re concerned about the overall comfort level in your home.

Indoor Air Quality

Along these same lines, you should take the time to have your indoor air quality improved by a professional. Indoor air pollutants are a growing problem, particularly in newer homes that are sealed up tight against the elements. These seals prevent all of your temperature conditioned air from escaping and make your home more energy efficient, but they also lead to inadequate ventilation and a buildup of things like gasses, dust mites, bacteria, mold spores and pet dander in your indoor air.

These are obviously not the types of things you want to breathe on a regular basis, so it’s a good idea to invest in ventilation and an indoor air quality system that can bring in a steady supply of fresh air from outside and remove any harmful contaminants from the air circulating through your home.

Continue Reading

Tags: , , ,
Posted in Indoor Air Quality | Comments Off on Is My Home as Comfortable as It Could Be? A Question From Palisades

How to Reduce the Load on Your Central Air Conditioner: A Guide From Washington

Wednesday, August 31st, 2011

The central air conditioner in your Washington house can handle a lot. It can keep your house cool and comfortable all summer long with only a minimum of maintenance. And if you have a newer, more energy efficient model, you probably are not even paying very much for this luxury. But no matter how good your air conditioning system is, it is always best if you can reduce its cooling load as much as possible.

Cutting down on the amount of work your central air conditioner has to do will save you money both in the short term and in the long term. You will be able to keep your house cool all summer while paying even less than you already do and you will help to extend the life of your system as well.

In general, reducing the cooling load that your air conditioner is responsible for involves keeping your house cooler by some other means. One great option when this is your goal is to have some ceiling fans installed. These help to circulate cool air and also create a breeze that can make it feel cooler even if the actual indoor temperature is the same.

With adequate ceiling fans in place, you will usually be able to turn up the thermostat on your central air conditioner and still be completely comfortable indoors. Turning up the temperature on the thermostat means that your air conditioning system will not have to work so hard because it will not have to get the indoor temperature down so low.

You can also reduce the indoor temperature in your house by blocking the sunlight that comes in and warms up the indoor air. Drawing the blinds, especially in those rooms that receive warmer afternoon sunlight will keep that sun from raising your indoor temperature. This, in turn, means that your air conditioning system will not have to work so hard to get the temperature back down.

You can also help to keep cool air inside and warmer air out by covering any doors and windows you are not likely to use with plastic. Also, check to make sure there are no cracks or drafts anywhere that may be letting in air from the outside or allowing cooler indoor air to escape. All of these things can make it possible for your air conditioner to keep your home cool without working so hard, and that will also mean that you will be paying less each month on your energy bills.

Continue Reading

Tags: , , ,
Posted in Air Conditioning | Comments Off on How to Reduce the Load on Your Central Air Conditioner: A Guide From Washington