Polar Bear Air Conditioning & Heating Inc. Blog: Posts Tagged ‘Air Conditioning’

What Is SEER? A Question From Washington DC

Wednesday, August 24th, 2011

If you’ve been looking at air conditioners in Washington, you’ve probably noticed that they all seem to have a SEER rating. But what does this actually mean?

The SEER, which stands for Seasonal Energy Efficiency Ratio, is a measure of how energy efficient a particular air conditioning model is. So when you’re shopping around for the best deal on an air conditioner for your home, this is something you’ll absolutely want to pay attention to.

Interpreting SEER Ratings

The SEER rating system is relatively simple – the higher the SEER, the more energy efficient the product. But because a higher price tag typically comes with a higher SEER rating, it’s important to know just how much more efficient a higher rated unit will be. It helps you decide whether paying significantly more for a higher rated unit is worth it in long term savings. Will it actually save you enough each month to make up for the difference in price?

Evaluating Your Energy Usage

A big factor here is how much you will use your air conditioner. If you live in a place with very hot and humid summers where the air conditioning runs constantly, you’re probably best off with the highest SEER you can find. When you consume that much energy to keep your home cool, you want to get as much as possible out of it, and that’s what a high SEER model can do for you.

On the other hand, if you live in an area that doesn’t have the harshest summers, you may be better off with a slightly less efficient (and therefore cheaper) model. Keep in mind, too, that the actual percentage increase in energy efficiency goes up by smaller and smaller increments the higher in SEER ratings you get. For instance, while a 10 SEER unit may be almost 20% more efficient than an 8 SEER model, a 12 SEER is only about 10% more efficient than that 10 SEER.

Finding the Right Balance

The best way to decide what SEER rating is best for you is to determine the annual cooling costs with your current unit and then calculate your savings in dollars based on the percentage each model would improve your efficiency. If you don’t currently have an air conditioner, this can be a bit tricky, but a professional contractor or air conditioning salesman can help you estimate your total monthly cooling costs with the various units.

Continue Reading

Cleaning Air Conditioners in Washington DC

Wednesday, August 17th, 2011

One of the best things you can do to help maintain high indoor air quality in your Washington DC home is to clean your air conditioning system on a regular basis. While these systems make it possible to endured a long, hot summer with minimal discomfort, they can also become a breeding ground for bacteria, mold and other indoor air contaminants that can make you sick or cause other types of problems.

Improving your indoor air quality isn’t the only reason you should worry about keeping your air conditioning system clean. A properly maintained air conditioner will function more efficiently for a longer period of time.

Air Filters

Changing or cleaning out your air filters regularly is one of the easiest and most important parts of air conditioner maintenance. These air filters are your number one line of defense against all manner of indoor air pollutants, but if they become saturated, they can no longer do their job. Fortunately, changing out these filters is a quick and easy job. Just mark the date on your calendar so you don’t forget.

Ducts

Without the system of air ducts that run through your home, your air conditioner wouldn’t be able to circulate all that cool air. But they’re also a very attractive place for dust, pollen, mold and other indoor air contaminants to collect. Unfortunately, the majority of your ductwork occupies space behind walls, beneath floors and in other equally inaccessible areas of your home.

For that reason, it’s generally necessary to have a professional with specialized equipment come out and clean your ducts once a year. By keeping up with maintenance, you can be sure that your air ducts aren’t harboring dangerous contaminants that your air conditioning system can then spread throughout your home.

Cooling Coils

The cooling coil is another part of your air conditioning system that needs to be cleaned on a regular basis. If your cooling coil is dirty, it won’t actually affect your indoor air quality, but it will impede your air conditioner’s ability to function effectively. The more sediment and debris allowed to build up on your air conditioner’s cooling coil, the less efficiently it will cool the air that passes over it. And if it can’t cool the air properly, your air conditioner will have to work overtime to maintain a comfortable temperature inside your home.

Continue Reading

Breakdowns – How to Handle an Overloaded AC in Washington DC

Wednesday, August 10th, 2011

The last thing you need on a hot summer day in Washington is for your air conditioner to suddenly cut out. Without the cooling power it provides, your house will get uncomfortable quickly. Fortunately, once you know why this happens, there are several things you can do about it.

Why Air Conditioners Cut Out

The most common reason for air conditioner failure is an overabundance of pressure in the unit. This happens because the coil gets too hot, causing the pressure to rise in the entire device. As the pressure rises past a certain point, an automatic safety shutoff system is engaged. If you can stop the coil from heating up to this point, you can keep your air conditioner running.

How to Keep Them Running

Of course, this is easier said than done. Since your condenser unit with the coil inside is located outside in the heat, it’s only natural for it to get hot during the day – especially an extra hot day when you’re using your air conditioner a lot. You also need to be careful not to put anything over or up against your outdoor condenser unit.

While this may block the sunlight, it will also keep heat in the system and prevent the air conditioner from removing exhaust naturally. So in order to keep your air conditioner as cool as possible, make sure there is nothing up against the vents or impeding air flow in any way. Once you’ve done this, try and find a way to provide shade for you air conditioner without placing objects near the device. Blocking out direct sunlight is the best way to keep your air conditioner cool as long as you can do it without interfering with the system’s natural air flow.

Getting it Back On

If your unit does cut out on you, don’t despair. The best thing to do is to wait about a half hour to give your unit a chance to cool off on its own. Then, spray the coil and other overheated areas with a fine mist of cool water. This should lower the temperature enough that the system can come back on without any further complications.

If the problem persists despite the work you’ve done to keep it cool, you may want to call in a professional to take a look and make sure nothing is broken or worn inside to cause the overloads. Most of the time a little maintenance will take care of the problem, but if not, you’ll want to get repairs done quickly to avoid a full breakdown.

Continue Reading

Is it Cost Effective to Use a Ceiling Fan and AC at the Same Time? A Question From Washington

Wednesday, August 3rd, 2011

There are a lot of ways to keep your Washington DC house cool in the summer, and chances are you’ve incorporated more than one of them into your home already. For instance, ceiling fans are great and can really keep you comfortable in moderately hot weather. But when the heat and humidity really start to pick up during the dog days of August, you need something a little more powerful to take the edge off, and that’s usually some type of air conditioner.

One or the Other?

If you’re like most people, you switch off your ceiling fan when the AC comes on. After all, the air conditioner is powerful enough to cool the house on its own. So is it really worth it to expend energy running another, secondary cooling device?

In fact, it is. Ceiling fans in particular use very little energy. Yet they’re quite effective at making your home feel cool and comfortable. So there’s really no reason not to take advantage of their benefits while running your AC.

Cutting Costs

You might be surprised to learn that far from being a waste of energy, using your ceiling fan and AC at the same time can actually save you money. That’s because the cooling power of the fan allows you to turn up the thermostat on your AC unit a couple of degrees without compromising your comfort levels.

And turning up the thermostat on the AC just that small amount will translate into pretty substantial savings on your monthly energy bills. That savings will more than pay for the cost of running the ceiling fan, and you save money.

Better Air Circulation

Running the ceiling fan with the AC on or off is always helpful in terms of promoting good air circulation throughout your house. And the more air circulates, the more comfortable your indoor environment will be. Good air circulation is also important because it helps to minimize the number of air contaminants that build up inside.

More Efficient Heating

The benefits of ceiling fans don’t stop with cooling either. In fact, you can run them in reverse to help maintain even heating in the winter. Essentially, there are few investments you can make that will serve you better throughout the year than a ceiling fan regardless of the other home heating and cooling systems you have in place.

If you want more information about which system is right for your home, contact your local air conditioning professional.

Continue Reading