Polar Bear Air Conditioning & Heating Inc. Blog: Posts Tagged ‘Heating’

Paying Too Much for Heating in Arlington, VA?

Tuesday, October 22nd, 2013

In terms of heating, Arlington, VA homeowners need to watch the bottom line. Our winters can get cold, and a good heating system is often the only way to keep your home warm and comfortable when temperatures drop. A lot of people simply accept high heating bills as the price they pay for a cozy home. But it doesn’t have to be the case. Are you paying too much for heating in Arlington, VA? If you are, you can take steps to alleviate the condition.

It can be tricky to spot high heating bills, especially in the winter. Obviously, you are not going to use your heater as much during the fall as you do in the dead of winter. One good method to determine whether you’re using too much energy is to schedule a maintenance session for your heating device. A trained technician can arrive at your home and examine the heater for any signs of wear or use. If a small part is worn out, he or she can replace it. If dirt or dust have built up, he or she can clean the unit. If larger repairs need to be made, he or she can pinpoint the problem and schedule a later service date. Ideally, this maintenance session should take place at the end of cooling season, before the winter settles in. It allows you to spot potential trouble areas and increases the heater efficiency, helping to cut down on heating costs.

If you’re able to consider something more radical, look into the possibility of upgrading your unit to a newer and more efficient one. Heating systems have their efficiency measured in Annual Fuel Utilization Efficiency (AFUE) ratings, measured as a percentage. The higher the percentage, the more energy is spent actually heating the home instead of being wasted. Newer units have a higher AFUE rating than older ones, and this can lead to significant savings on your utility bills each month.

If you’re paying too much for heating in Arlington, VA, Polar Bear can help. Whether you want to install a new unit or just give a little care to your old one, our staff has the training and experience to do the job right. Call us today to set up an appointment.

Continue Reading

3 Reasons to Consider a Furnace in McLean, VA

Tuesday, October 15th, 2013

Nothing can fight back a snowy day like a warm, cozy household, with heating provided by a reliable furnace. Furnaces aren’t the only form of reliable heating in this neck of the woods, however. You can also find boilers, heat pumps, and many others. So what are the benefits of a furnace? What makes them a better option for heating that other technologies?

Here are 3 reasons to consider a furnace in McLean, VA:

  1. Energy efficiency. Gas furnaces tend to operate at high levels of efficiency, costing less to install and run than other forms of heating. You can easily customize them to add energy-saving upgrades like zone control and programmable thermostats.
  2. Few breakdowns. Gas furnaces suffer from wear and tear like any other mechanical system. But they are known to be both reliable and durable. That means fewer repairs and fewer complete breakdowns.
  3. Versatility. Alternate forms of heating aren’t always practical for every home, and you may need to make big changes in your home in order to accommodate them. Gas furnaces, on the other hand, are extremely flexible, and modern models have a lot of installation options.  You do need ducts for a furnace to heat your home, but they can be the same ones that are used by your central air conditioning system.

If you need more reasons to consider a furnace in McLean, VA, contact Polar Bear for sound advice and expertise. We can install a new furnace in McLean, VA, as well as setting up a reliable maintenance schedule to keep it running smoothly. Our trained technicians are dedicated to your complete satisfaction and we will discuss your options with you so that you’re completely clear on what will happen. Contact us to schedule an appointment today.

Continue Reading

Northern Virginia Boiler FAQ: How Do Boilers Work?

Monday, October 7th, 2013

Here at Polar Bear, we advise our customers to place boilers on their list of potential heating systems to install in their homes. Modern boilers provide some tremendous advantages: low cost installation, energy-efficient performance, even heating, quiet operation, improved air quality, durability, and longevity. In Northern Virginia, a boiler is one of your best options for a comfortable and cozy home all the way through to spring.

But how exactly does a boiler work? Here’s something you probably didn’t know: there are few boilers today that do any “boiling.” Older models operate from steam, but the modern ones use hot water to heat your home. We’ll give you a rundown on how these boilers work, and this information will help you understand better why boilers are good heating options.

Boilers can run off a variety of fuel sources: natural gas, electricity, and oil are the most common. We’re going to focus on the type we see the most often in homes, the gas-powered boiler, in this post.

A boiler uses a tank full of water that it heats up and then sends into your house to raise the temperature in your living space. A pilot light ignites gas jets in a combustion chamber located underneath the water tank. These jets raise the temperature of the water—although not to the point of boiling into steam the way old systems used to do. A pump them moves the hot water through pipes.

The hot water eventually reaches an end point, usually a radiator or a baseboard heater, where heat then radiates into your home. (This is why boilers won’t lower the air quality in your house: they use radiant heat instead of forced air moved through ducts that can become dirty.) The cooled-down water from the terminal point then returns to the tank, where the process of heating it starts again.

We recommend homeowners look into gas-powered boilers—especially if they already have a natural gas supply hooked to their house—because they are among the most efficient and energy-friendly heating options available today. Our heating experts at Polar Bear also perform oil-to-gas conversions to help you get the highest efficiency from your current boiler. When you need help with your boiler, the Northern Virginia specialists at Polar Bear are ready to give you the assistance you need.

Continue Reading

The Benefits of Oil to Gas Conversions

Monday, September 30th, 2013

Do you want all the benefits of a gas boiler or furnace without the high replacement cost? Have you considered an oil to gas conversion? Polar Bear Air Conditioning & Heating, Inc. offer oil to gas conversions for customers in the Washington, D.C. area.

Here are reasons customers would want to convert from oil to gas:

1. Homeowners will save a lot of money on fuel bills.

2. The system will pay for itself through energy savings in just a few years.

3. Natural gas is a much cleaner burning fossil fuel, which is better for the environment.

4. Home heating oil can be smelly, but natural gas is odorless.

5. Homes with natural gas heating systems have higher resale value.

Call Polar Bear today to find out if your existing oil boiler or furnace can be converted to natural gas. The switch can save you money on fuel and natural gas is much better for the environment. Natural gas can also be piped directly to your home, so you never have to worry about fuel deliveries again! Let the expert team at Polar Bear Air Conditioning & Heating, Inc. take care of your oil to gas conversion, increase the potential value of your home, and help you save money on energy costs!

Continue Reading

Is it Time for Furnace Replacement in Washington, DC?

Monday, March 4th, 2013

Investing in a furnace replacement in Washington, DC is a major decision. It requires not only researching for the best new furnace for your home, but also knowing when furnace replacement is necessary. If you’re thinking about replacing the furnace in your Washington, DC home, call the experts at Polar Bear Air Conditioning & Heating. We can help you to weigh your options and your budget so that you can make an informed and confident decision. We know how hard it can be to go through this process so we put together a short guide that might be able to help.

Signs You Need Furnace Replacement

So how do you know if it’s time for furnace replacement? Here are some things to consider:

  • Frequent repairs. If you regularly repair your existing furnace and it seems like there is no end to the amount of money you spend on it, it may be time to invest in a replacement. When an old furnace becomes a money pit, sometimes it’s better to start anew, than to try to salvage the old.
  • Old age. If your furnace is old and has started requiring repairs, then you may want to consider replacement. The repair costs on older units are often more than it would cost to get a new model.
  • Energy efficiency. Today’s gas furnaces boast AFUE ratings of up to 97%, which means that only a small fraction of the energy drawn from the fuel is lost. This can mean big savings for you in the long-term. In fact, it might make more sense to replace your furnace, even if your old one has not yet stopped working. The technology is rapidly advancing, and it may be worthwhile to talk to a furnace expert soon about your energy efficiency options.

Remember that when you consider furnace replacement, you need to look for an installation company that provides exceptional service at great value. Look no further than Polar Bear Air Conditioning & Heating for all of your furnace replacement needs in Washington, DC. Call us today. 

Continue Reading

Washington DC Furnace Tip: What to Do if Your Furnace Breaks Down

Monday, February 25th, 2013

Don’t leave your Washington DC home without heat this year. If you have a problem, call for emergency repair service from Polar Bear Air Conditioning & Heating to get your furnace back up and running. We are also available to discuss furnace replacement options with homeowners, in order to help them understand the cost-benefits to a new, energy-efficient unit. For more information, call us today. 

If your furnace breaks down, call a pro. Furnaces are complex machines designed to be handled by trained technicians. Attempting to repair it yourself can be dangerous and may only increase the damage. Here are some common problems that can cause a furnace to break down:

  • No power- Your furnace requires electricity to function. The system may have blown a fuse or tripped a circuit.
  • Thermostat malfunction- Ensure that your thermostat is properly tuned to a warm temperature, but if it’s not responsive, it can sometimes indicate a problem with your thermostat calibration.
  • Motor problem- The motor that powers your blower components may have worn out, or needs to be reset.
  • Pilot light out- If your furnace is not igniting, your pilot light might be out. It is the small flame that allows the gas to ignite. You may have automatic electric ignition instead of a pilot, however, which requires its own diagnosis.
  • Thermocouple fault- The thermocouple is an electronic device that senses the heat around your pilot light. If it senses that the air is too cold, it determines that your pilot is shut off and shuts off the supply valve. This is a safety measure, designed to protect you.

Whatever the reason for furnace breakdown, call in a heating professional.  You should also make sure to enroll in maintenance plan for your new or repaired furnace. Not only will it give you the peace of mind of professional care, but it may also save you significant money on repairs in Washington DC.  Polar Bear Air Conditioning & Heating is available for emergency and routine furnace repair services. Call us today!

Continue Reading

Causes of Boiler Problems in Washington DC

Monday, February 18th, 2013

Our Washington, DC boiler experts can take care of all your boiler repair and maintenance needs. If you need any type of service for your boiler, or if you simply have questions, give us a call. While you should call a repair technician as soon as you notice an issue, it is important to understand the causes of some of the more common boiler problems so that you can prevent them from occurring.

In this post, we explore some of the potential causes of problems with many types of boilers. Don’t hesitate to call us if you have questions or need to schedule service.

Not Enough Heat

Are you not getting enough heat from your boiler? There are a few potential reasons for this. One of the more common causes is that something has happened to throw off the hot water levels inside the tank. The hot water should be on the top, so when you feel the tank, it should feel warmer near the top. If this is reversed, there’s a problem, and it could be causing your heating problem. Often water levels are off because of sediment buildup, but another potential cause is a faulty pressure valve.

Leaky Boiler Tank

If you have a leaky boiler tank, this can cause any number of problems, including low heat output and low water pressure in hot water systems. Look for signs of rust or water leaking near the tank. If you notice any of these warning signs, call a Washington DC repair technician. A leak can cause water damage and also damage your boiler system.

Many homes in the Washington DC area use boilers for heat and hot water. At Polar Bear Air Conditioning & Heating, Inc., we can solve all your boiler problems, from sediment build-up, to faulty pressure gauges and broken thermostats. Call us for fast and reliable boiler repair and comprehensive boiler maintenance services.

Continue Reading

Causes of Common Boiler Sounds: Washington, DC Boiler Repair Guide

Monday, February 11th, 2013

Boilers are one of the most common heating systems in the country. They provide comfortable and efficient heat and only require regular maintenance to work reliably. At Polar Bear Air Conditioning and Heating, we offer complete boiler repairs and installation in Washington, DC. One of the most common calls for service that we get is boiler noises. All boiler repairs should be done by a professional contractor. We thought it would be helpful if we put together some of the most common causes of boiler noises so that our customers would know when to call us.

Boiler Knocking and What It Means

Perhaps the most common boiler noise that people in Washington, DC call us about is a knocking sound. There are several causes for this sound and you should always consult a professional plumber if you start to hear that noise.

  • Air in the pipes – Over time, air bubbles can start to build up in your boiler pipes. Unless your boiler lines get regularly bled, the air moving through your pipes can create a knocking sound. This is usually fixed by a heating technician who can open the pressure release vale to let the air out.
  • Oversized boiler – If your boiler is too large for your home it can cause boiling in your water lines which can cause a knocking.
  • Sediment – If you have hard water at your home the excess minerals can start to build up on the bottom of your boiler tank. When the burner kicks on to heat up the water, the sediment crust will block the heat and cause rapid heating of the water underneath the crust to heat up quickly and form steam.
  • Expansion tank – The expansion tank for your boiler allows for it to accommodate the physical properties of water that make it expand when heated. If your expansion tank isn’t working right it could cause the knocking sound as well.

If you need boiler repairs in Washington, DC, just call the experts at Polar Bear.

Continue Reading

Washington DC Boiler Question: How Does a Boiler Heat a Home?

Monday, February 4th, 2013

Many homeowners swear by the efficient, effective performance of their boilers. There is a reason that boiler heating systems have been so popular for as long as they have, after all. With a professional boiler installation and routine maintenance you can enjoy years of comfortable, even heating service from your boiler. They have few moving parts and are incredibly durable, making a boiler a great investment for your Washington DC home. Like most homeowners, though, we’re guessing that some of you do not actually know how a boiler heats a home. Here is some basic information from Polar Bear Air Conditioning & Heating.

The operation of a boiler is actually very simple. The boiler itself is really just a tank containing water. A separate component of the boiler system, the burner, is to burn the fuel that will heat the water within the boiler. One of the greatest benefits of a boiler installation is the fact that there are a number of fuel source options available. The fuel is mixed with air and ignited, allowing the boiler and the water within to heat up to create hot water or steam.

Once the water has reached the appropriate heat level, it is ready for circulation throughout the home. In a hydronic heating system hot water is distributed throughout your home through a piping system. Radiators or baseboards may also be used to distribute the heat a boiler creates throughout a building. The result is even, efficient radiant heating. Unlike a furnace depending on forced air to circulate heat, boilers do not stir up the air in your home. This is an added benefit to residents with allergies or asthma symptoms for whom airborne pollutants can be an aggravating concern.

For more information on your boiler options and their operation, contact Polar Bear Air Conditioning & Heating. We have the answers to all your questions. Let us handle the installation, maintenance and repair of your boiler heating system in Washington DC.

Continue Reading

Washington DC Heating Tip: Benefits of an ENERGY STAR Qualified Boiler

Monday, January 28th, 2013

Are you considering an ENERGY STAR boiler for your Washington DC area home? The boiler specialists at Polar Bear are here to help! We provide installations for a number of ENERGY STAR qualified boilers, and we also provide routine maintenance so that your new boiler will provide lasting results.

Here are a few benefits you can get from an ENERGY STAR qualified boiler:

Energy savings is perhaps the best benefit from an ENERGY STAR qualified boiler, especially if you are replacing an older boiler that has an AFUE (annual fuel utilization efficiency) rating of less than 80%. A new boiler will also need fewer repairs, which can make a big difference in the overall cost of heating your home. If your home is properly insulated and sealed, you can see quite a bit of savings from a new high-efficiency boiler.

If you are building a new home, consider a boiler that can both heat your home and your hot water. This is an efficient way to provide heating and consistent hot water. Radiant floors can also be heated by a boiler designed for radiant floor heating systems, and this will provide even greater energy savings. While there are a variety of boilers on the market today, an ENERGY STAR qualified boiler can help you not only keep your home comfortable, but also save you a lot of money over time.

Don’t hesitate to call the Washington DC heating experts at Polar Bear for all your boiler installation needs. We are here to find the most cost-effective solutions for your needs, so call today to get started!

Continue Reading